TAG TT V

water tempering units

WATER tempering units up to 90 ° C are used for heating and tempering of injection molds and heating systems. They can be connected to molds for small to medium-sized injection molding machines or extruder lines.

TT-170 L

Heating capacity 3 kW, use with water up to 90 ° C, without flow control
The device is designed for molds weighing 1 - 50 kg, small cylinders up to a diameter of 80 mm and a length of 300 mm and for laboratory use

Datasheet TT-170 L PDF

TT-180

Universal device for use with water or oil, without flow control
Use with water: for temperatures up to 90 ° C, for molds up to 600 kg, heating output max. 9 kW
Use with oil: for temperatures up to 150 ° C, for molds up to 300 kg, heating output 3 kW

Datasheet TT-180 PDF

TT-181

Universal device for use with water or oil, without flow control
Use with water: for temperatures up to 90 ° C, for molds up to 600 kg, heating output max. 9 kW
Use with oil: for temperatures up to 150 ° C, for molds up to 300 kg, heating output 3 kW
Difference from TT-180: possibility to use suction mode and automatic emptying

Datasheet TT-181 PDF

TT-188

Universal device for use with water or oil, with electronic flow control, with the possibility of using the suction mode
Use with water: for temperatures up to 90 ° C, for molds up to 600 kg, heating output max. 9 kW
Use with oil: for temperatures up to 150 ° C, for molds up to 300 kg, heating output 3 kW

Datasheet TT-188 PDF

TT-168 E, H, E/A, H/A

Depending on the model, only water or universal devices with electronic flow control and with the possibility of using the suction mode
Models TT-168 E, TT-168 H: universal devices
Use with water up to 90 ° C (for molds up to 1200 kg, heating output max. 12 kW)
Use with oil up to 150 ° C (for molds up to 600 kg, heating output max. 6 kW)
Models TT-168 E / A, TT-168 H / A: use with water up to 90 ° C, for molds up to 1800 kg, heating output max. 18 kW

Datasheet TT-168 PDF

TT-168 PHE

Depending on the model, only water or universal devices with electronic flow control and with the possibility of using the suction mode
The device is equipped with two heat exchangers - for temperatures below 50 ° C it is possible to switch to a plate heat exchanger with a higher cooling capacity
TT-168 E / PHE, TT-168 H / PHE models: universal devices
Use with water up to 90 ° C (for molds up to 1200 kg, heating output max. 12 kW)
Use with oil up to 150 ° C (for molds up to 600 kg, heating output max. 6 kW)
Models TT-168 E / A / PHE, TT-168 H / A / PHE: use with water up to 90 ° C, for molds up to 1800 kg, heating output max. 18 kW

Datasheet TT-168PHE PDF

TT-108 E

Water device for use up to 90 ° C, for molds up to 1200 kg
Heating capacity max. 6 kW, 12 kW, 18 kW (depending on model)
With electronic flow control and the possibility of using the suction mode
The device has only direct cooling (without heat exchanger)
Pump type E
Size identical to TT-168E

Datasheet TT-108 E PDF

TT-108 K

Water device for use up to 90 ° C, for molds up to 1800 kg
Similar features to the TT-108E, but is larger and has higher heating power
Heating capacity max. 18 kW, 27 kW, 36 kW, 45 kW (depending on model)
With electronic flow control and the possibility of using the suction mode
The device has only direct cooling (without heat exchanger)
Pump type K
Size identical to the TT-118K

Datasheet TT-108 K PDF

TT-118 K

Water appliance for use from 25 ° C to 90 ° C
Heating capacity max. 18 kW, 27 kW, 36 kW or 45 kW (depending on model)
With electronic flow control and the possibility of using the suction mode
The device is equipped with two heat exchangers - for temperatures below 50 ° C it is possible to switch to a plate heat exchanger with a higher cooling capacity

Datasheet TT-118 K PDF

TT-1368 W

Heating capacity 48 or 72 kW, use from 20 ° C to 90 ° C, high cooling capacity (plate heat exchanger), large expansion tank

Datasheet TT-1368 W PDF

TEMPERING UNITS - MATIC MODELS

MATIC Water 90 18 E, H

Tempering control unit designed for operation with water
Heating capacity: max 18 kw
Use with water: for temperatures up to 90°C
High-performance cooling system: spiral and plate heat exchangers
Cooling capacity: 100 kW
IRIS control system: with a touchscreen display and remote control options (phone, tablet, or computer)
Automatic water filling
Applications: for plastic processing (extruders, calenders, double-walled tanks, etc.)

Datasheet MATIC Water 90 18 E PDF

Datasheet MATIC Water 90 18 H PDF

MATIC Water 90 K

Tempering unit designed for operation with water
Heating capacity: max. 18 kW, 27 kW, 36 kW, or 45 kW (depending on the model)
Use with water: for temperatures up to 90°C
High-performance cooling system: spiral and plate heat exchangers
IRIS control system: with a touchscreen display and remote control options (phone, tablet, or computer)
Automatic water replenishment
Applications: for plastic processing (extruders, calenders, double-walled tanks, etc.)

Datasheet MATIC Water 90 18 K PDF

Datasheet MATIC Water 90 27 K PDF

Datasheet MATIC Water 90 36 K PDF

Datasheet MATIC Water 90 45 K PDF

MATIC Duo 90/150 9 E

Universal device for use with water or oil
Use with water: for temperatures up to 90°C, heating capacity max. 9 kW
Use with oil: for temperatures up to 150°C, heating capacity max. 9 kW
IRIS control system: with a touchscreen display and remote control options (phone, tablet, or computer)
Leak prevention function in the circuit

Datasheet MATIC DUO 90/150 9 E PDF

MATIC Duo 90/150 18 E, H

Universal device for use with water or oil
Use with water: for temperatures up to 90°C, heating capacity max. 18 kW
Use with oil: for temperatures up to 150°C, heating capacity max. 18 kW
IRIS control system: with a touchscreen display and remote control options (phone, tablet, or computer)
Leak prevention function in the circuit